WORKFLOW
VIDEO
Infeed size: Outfeed size: Paper weight: Paper type: Loading capacity: Speed: Register mark: Double sheet detection: Crease width: Crease depth adjustment: Crease and Perf in one pass: Slitting: Cutting: Accuracy: Image shrink and stretch: Control and display: Optional tools:





Infeed size: Outfeed size: Outfeed folded size: Fold type: Accuracy: Delivery conveyor: Outfeed conveyor:
210*210mm-330*900mm(hardware) , (upto 1100mm can be input in software) 50*48mm-330*1100mm (More than 900mm request option.) 150-400gsm (350-400gsm depends on material) Chrome, Laminated,UV coated etc. 100mm 20 pcs/min(A4,4 side trim+1 crease) X and Y axis image drift compensation Ultrasonic double feed detector 1.0mm standard, 0.6/1.2/1.4mm option Auto set according to thickness Up to 32 times 6 slitters for auto setting  (Standard), 4 slitters for manual setting (Option) Up to 32 times in one pass +/-0.2mm X and Y axis compensation 9 inch color touch screen Cross perforator (6/12/24/52TPI), Slitter,linear kiss cutter,scorer,Linear perforator (8/12/24/48TPI), Linear Partial perforator Auto card stacker


75*140-330*650mm 50*48-330*650mm 75*70mm-330*328mm 7 types (half ,letter, zigzag, offset, Gate I, Gate II, double half ) +/-0.3mm Air suction belt conveyor in standard Conveyor with auto adjust exit stacker guide in standard to collect fold cards.

FOR 8336BSC
FOR MCF33
Delivery conveyor can work as card stacker for the short card length without fold
SPECIFICATION
SUCTION FEEDING TABLE
ULTRASONIC DETECTOR
SLIT AND CUT UNIT
INTUITIVE INTERFACE
IMAGE COMPENSATION
PARTIAL LINEAR PERFORATING UNITS
SLIDE-IN EXCHANGEABLE TOOLS
ONLINE FOLDER
MultiCard pro is a completely automated finishing system equipped with  top feeding suction feeder which is right side registed . The feed table holds a stack of paper up to 100mm high.
Absolutely straight megnetic pilar side guide allows loading of different width of paper and constant skew, while the skew of the table is adjustable.
Adjustable blast and seperation height allows loading of different thickness.
Various of paper deflector and press avoid thinner paper flap too much under blast to ensure a constant and smooth feeding.
When the ultrasonic sheet detector sees more than one sheet being fed at a time it automatically stops the machine. This system eliminates the system from having to stop due to a mis-feed and prevents a jam before it happens.
MultiCard pro has 6 slitting heads that will slit each sheet at pre-set positions. A precision machined screw bar ensures accuracy each time the heads move from one position to another. A fully automated cross cutting system also ensures sheets are cut accurately in the cross direction.  Up to 32 cuts per sheet are possible. Three columns with gutters or up to 5 columns without gutters can be made. This allows a larger sheet to be cut down to size in both directions without having to add any accessories or additional hardware. Cards are automatically dropped to an  waste bin.
Operators can program a job in two ways:
1) input sheet size, finished card size and trim and gutter specifications OR
2) input all of the slit/cut/crease positions user the interface. The graphical interface design ensures that users know the values that have been input but can also see them which is more convenient and user friendly.
Digitally printed pages differ from offset printed pages as the accuracy of where the image on the page and where 2 back to back pages are in relation to each other is much lower. This can lead to a finished job being unacceptable to the customer. 8336BSC software contains a series of icons that allow the user to compensate for image shift/stretch/shrink simply through a few clicks of adjustment.
Up to 4 option linear partial perforator is allowed to be mounted in the the system so that it make cross or T shape perforation together with perf bar. Upto 16 partial section can be defined from the touch screen
A slot where slide-in tools can be easily exchanged allows for a wide variety of jobs to be performed. A male and female crease bar and a perforating bar are available. All tools are made out of durable metal and will last as long as the main body of the unit.
What makes the MCF33 unique is that it is specially built to fold multiple columns of printed sheets all at the same time. This allows it to operate immediately behind a slit-cut-crease machine such as the 8336BSC. The MCF33 knife folder is also built to handle heavier digitally printed stocks and will not cause scratching or scuffing on printed pages. Buckle folders were designed for lighter stocks and often cause scratches or scuff marks due to the friction feeding system or the fold plates. Roller gap settings on the MCF33 also allow it to handle a variety of heavier stocks as well as laminated sheets.
FEATURES
DIMENSIONS
HUIZHOU AUSJETECH CO.,LTD.
60, Xiantang Road, 516166, Taimei, Buoluo Huizhou Guangdong China

tcc@ausjetech.com

Phone/Wechat/WhatsApp:
0086-13631928078
Contact detail: