HUIZHOU AUSJETECH CO,LTD.

English

中文

8336CSC Conveyor Slit Cutter

Slit, Cut, Crease Up/Down, Perf ,inline with printer

8336CSC is a slit cutter solution working together with digital printer, which received output sheet from printer and slit cut into certain size and with finishing like crease or perf. The design elminate the time waste between printer collection and slit cut working, but put 2 process into one. In the means time, the solution solved the problem of heavy static which stop feeding on pile feeder.

The machine has inline mode and offline mode, inline mode work with Brand like Ricoh , and offline mode working with any printer with proper height and output speed.

VIDEO

Infeed size:

Outfeed size:

Paper weight:

Paper type:

Register mark:

Double sheet detection:

Crease width:

Crease depth adjustment:

Crease and Perf in one pass:

Slitting:

Cutting:

Accuracy:

Image shrink and stretch:

Control and display:

Optional tools:

210*297mm-330*500mm

50*48mm-330*500mm

150-400gsm(350-400gsm depends on material)

Chrome, Laminated,UV coated etc.

X and Y axis image drift compensation

Ultrasonic double feed detector with sheet eject

1.0mm standard X2 pcs, 0.6/1.2/1.4mm option

Auto adjustment according to thickness

6 slitters for auto setting (Standard),4 slitters for manual setting (Option)

Up to 32 times in one pass

+/-0.2mm

X and Y axis compensation

7 inch color touch screen

Cross perforate bar (6/12/24/52TPI),Slitter,linear kiss cutter,scorer,

Linear perforator (8/12/24/48TPI),Partial perforator*Max 4

SPECIFICATION

INLINE MODE

OFFLINE MODE

1. The speed of printer should be adjustable and lower than the Slit cut job speed

2. Job of finisher should be select manually.

3. Finisher should be start manually or by sensor of paper

4. Finisher will not damage coming print sheet with error as error will open the gate at the entrance so that sheet will go down to the cabinet instead of into the slit cut unit.

5. Besides Printer, Laminator is also a good partner to work with 8336CSC in offline mode.

CONVEYOR FEEDING TABLE

SLIT AND CUT UNIT

INTUITIVE INTERFACE

IMAGE COMPENSATION

PARTIAL LINEAR PERFORATING UNITS

SLIDE-IN EXCHANGEABLE TOOLS

OUTFEED CONVEYOR OPTION

8336CSC feeding table is conveyor belt driving with steel ball press, the side guide is auto adjustable according to preset sheet size, the precision side guide position ensure the sheet is exactly feed in the middle.

In offline mode,the gate at the entrance is closed normally to allow sheet enter into the table, but when error happens, the gate will open up so that sheet will go inside the cabinet to save sheet from waste.

8336CSC has 6 slitting heads that will slit each sheet at pre-set positions. A precision machined screw bar ensures accuracy each time the heads move from one position to another. A fully automated cross cutting system also ensures sheets are cut accurately in the cross direction. Up to 32 cuts per sheet are possible. Three columns with gutters or up to 5 columns without gutters can be made. This allows a larger sheet to be cut down to size in both directions without having to add any accessories or additional hardware. Cards are automatically dropped to an waste bin.

Operators can program a job in two ways:

1) input sheet size, finished card size and trim and gutter specifications OR

2) input all of the slit/cut/crease positions user the interface. The graphical interface design ensures that users know the values that have been input but can also see them which is more convenient and user friendly.

Digitally printed pages differ from offset printed pages as the accuracy of where the image on the page and where 2 back to back pages are in relation to each other is much lower. This can lead to a finished job being unacceptable to the customer. 8336BSC software contains a series of icons that allow the user to compensate for image shift/stretch/shrink simply through a few clicks of adjustment.

Up to 4 option linear partial perforator is allowed to be mounted in the the system so that it make cross or T shape perforation together with perf bar. Upto 16 partial section can be defined from the touch screen

A slot where slide-in tools can be easily exchanged allows for a wide variety of jobs to be performed. A male and female crease bar and a perforating bar are available. All tools are made out of durable metal and will last as long as the main body of the unit.

In order to collect more cards without stopping the machine, Optional outfeed conveyor can be mounted at the exit of card cutter, whose capacity is enough to collect any cards of different sizes proceed from full pile height of feed sheets at feeding table.

FEATURES

DIMENSIONS

HUIZHOU AUSJETECH CO.,LTD.

60, Xiantang Road, 516166, Taimei, Buoluo Huizhou Guangdong China

tcc@ausjetech.com

Phone/Wechat/WhatsApp:

0086-13631928078

Contact detail: